Kitchen trends 2022

Kitchen trends of 2022

It’s no surprise that one of the most important rooms in the house is the kitchen. It is where a lot of events in life take place, from morning meals to fun family gatherings, meetings with friends and solving important family issues in the evening. The kitchen is the center of all family life. Functional design, comfort, modern appearance – is the main priorities of the design of fashionable kitchen interior 2022…

Even in the smallest kitchen you can arrange a cozy space in all read more

Type of tiles by surface

Type of tiles by surface

Various methods of production and surface treatment, in the manufacture of ceramic tiles, give a wide variety of surfaces.

The surface of the tile can be:

  1. Glazed tiles
  2. Matte tiles
  3. Polished tiles
  4. Lapped tiles
  5. Structured tiles

Finishing the front side of the tile not only gives it decorative properties, but also provides certain performance characteristics.

Glazed tiles

Glazed tiles In the manufacture of glazed tiles, a mineral composition is applied to the formed workpiece, after which the product is fired. After the coating melts and cools down, a glass layer forms on the surface, which read more

bathroom floor screed

How to level the floor for laying tiles

Levelling the floor is one of the main steps in installing tiles. The performance and aesthetic appeal of the flooring depend on the quality of the work performed.

When preparing a floor for a tiling, first of all, a set of certain measures should be performed.

The general sequence is as follows

Dismantle the old coating (if any). All fragments of the previous coating are removed, and the debris is removed. Dust is removed with a vacuum cleaner. If there are any voids (slots, channels, etc.), they are sealed, because if you leave them, then you will receive significant losses of the solution when pouring. For the best effect, it is advisable to wipe the entire floor surface with a damp cloth and let it dry. This achieves complete dust removal. True, it is impossible to start pouring the screed until the surface is completely dry. The base is primed with a special compound (primer) to increase the adhesion of the mortar to the base. In addition, the primer has some kind of waterproofing effect. The determination of the greatest differences in height is carried out and the setting of profiles – beacons using a laser level. At the end of the preparation, the room must be ventilated. Close windows and doors after ventilation. the screed does not favour drafts too much and the ambient temperature is below + 5⁰С.

Floor Screeding

The floor screeding is an intermediate layer that is located between the base and the floor covering. If the surface difference is between read more